Thread
:
got a question about netgear routers.
View Single Post
Reply
Posted 2004-09-15, 02:51 PM in reply to
kockblocker1
's post starting
"Try 192.168.1.2 Or 192.168.0.2 Don't..."
kockblocker1 said:
Try 192.168.1.2 Or 192.168.0.2
Don't forget to set your DNS server IPs and subnet mask. Just use the Subnet you currently have (command prompt: ipconfig /all). Your gateway should be 192.168.1.1. Any Internet DNS IP should work for internet access. Just because you are restricted to that 1 DHCP address doesn't necessarily mean you can't physically assign yourself another. If that router model is locking your particular LAN port to that specific IP than you may need to change ports on the Router/Switch.
i tried that with no success. i think he has me locked down pretty good..
he's not stupid enough to leave admin passwords default, so, short of trojanning/keylogging him, i don't think there is anything i can do.
just a thought.. when i enter 192.168.0.1 it tells me it's in use. could i just pull his ethernet cable and then use .1 as the ip since it'll no longer be in use?
note: it's a 4 port router. switching ports does nothing.
Profile
PM
WWW
Search
symnzXx